HOW TO

Please refer to our YouTube Tutorial before installing.

01

Please clean your watch so that there is no dirt or dust.

Fill the enclosed spray bottle with pure water.

02.1

Using the enclosed plastic tweezers, carefully peel off the film.

02.2

Spray water on the sticky side of the film and place the film on the corresponding part of your watch.

03

Remove as many water bubbles inside the film as you can.

You can gently push out the water bubbles with the plastic tweezers or with your fingers.

04

We recommend that you dry the film for at least 3 minutes after every attachment of a piece of film.

05

After 3 at least minutes, press the attached area firmly so that the film becomes secured.

06

Finally, this is the most important step. PLEASE DO NOT WEAR YOUR WATCH FOR AT LEAST ONE DAY. It takes time to become fully secured.

Congratulations!

07

Now you are the owner of a WATCH-SHELLED ROLEX.

You can keep your Rolex in a new condition as long as you use WATCH-SHELLS™.

  • Some water bubbles may remain after the shell dries. Most of the remaining water bubbles will be removed during the drying process.

What SHELLS Covers 


✓ CASE - Front / Back / Side (3 o'clock / 9 o'clock)


✓ LUG - Front / Back


✓ GLASS (excl. Cyclops)


✓ BEZEL INSERT


✓ BRACELET (including Link & Screw)


✓ BUCKLE - Front / Side


  • We do not create shells for Jubilee bracelets.
  • We do not create shells for Fluted bezels.
  • For Daytona, there is a slight difference in the lugs. Therefore, when you install the shells, please take care to refer to the directions we noted in the YouTube film.
HOW TO

Please refer to our YouTube Tutorial before installing.

01 

Please wipe the surface of the watch clean so that there is no dirt or dust. Please put pure-water in the enclosed spray.

02.1

Using the enclosed plastic tweezers, carefully peel off the film.

02.2

Remove as much water bubbles inside the film as possible. It is also good to gently scrape off with plastic tweezers or by hand.

03

Remove as many water bubbles inside the film as you can.

You can gently push out the water bubbles with the plastic tweezers or with your fingers.

04

We recommend that you dry the film for at least 3 minutes after every attachment of a piece of film.

05

After 3 at least minutes, press the attached area firmly so that the film becomes secured.

06

Finally, this is the most important step.

PLEASE DO NOT WEAR YOUR WATCH FOR AT LEAST ONE DAY.

It takes time to become fully secured.

Congratulations!

07

Now you are the owner of a WATCH-SHELLED ROLEX.

You can keep your Rolex in a new condition as long as you use WATCH-SHELLS™.


  • Some water bubbles may remain after the shell dries. Most of the remaining water bubbles will be removed during the drying process.

What SHELLS Covers

✓ CASE - Front / Back / 

Side (3'o clock / 9 o'clock)

✓ LUG - Front / Back

✓ GLASS (excl. Cyclops)

✓ BEZEL INSERT

✓ BRACELET

✓ (including Link & Screw)

✓ BUCKLE - Front / Side

  • We do not create shells for Jubilee bracelets.
  • We do not create shells for Fluted bezels.
  • For Daytona, there is a slight difference in the lugs. Therefore, when you install the shells, please take care to refer to the directions we noted in the YouTube film.
WATCH-SHELLS   by Hartist and Company

©2018-2021 All rights reserved.


CEO. JUNYEONG KIM

VAT ID(KR). 436-86-00071

WATCH-SHELLS ™  by Hartist and Company

©2018 All rights reserved.


ADDRESS.

26, Nonhyeon-ro 153-gil

Gangnam-gu, Seoul

06033

Republic of Korea


CALL. +82 2 517 6788

WATCH-SHELLS ™  by Hartist and Company

©2018 All rights reserved.


CUSTOMER SERVICE.

watchshells@hartist.co


TERMS & CONDITIONS

RETURN / EXCHANGE

PRIVACY

FAQ

WATCH-SHELLS ™  by Hartist and Company

©2018 All rights reserved.


TEXT VIA WHATSAPP.